Problems initialising the E1 debugger with E2studio 1.1

Hello,

After updating to 1.1 I have difficulties connecting my E1 debugger. When i try to connect it gives me this warning:

This is the content of the debug_log.txt file:

[1349247084.681]  UserInterface::Display_Banner():  Raw options : C:\Renesas\e2studio\DebugComp\e2-server-gdb.exe -g E1 -l 0 -t R5F563NB -p 61234 -d 61236 -uClockSrcHoco= 0 -uInputClock= 12.0000 -uAllowClockSourceInternal= 0 -uUseFine= 0 -uJTagClockFreq= 16.5 -w 1 -z 0 -uRegisterSetting= 0 -uModePin= 0 -uDebugMode= 0 -uExecuteProgram= 0 -uIdCode= FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -n 0 -uWorkRamAddress= 1000 -uProgReWriteIRom= 0 -uProgReWriteDFlash= 0

[0.000]  mainGDB():  Command line parameters C:\Renesas\e2studio\DebugComp\e2-server-gdb.exe -g E1 -l 0 -t R5F563NB -p 61234 -d 61236 -uClockSrcHoco= 0 -uInputClock= 12.0000 -uAllowClockSourceInternal= 0 -uUseFine= 0 -uJTagClockFreq= 16.5 -w 1 -z 0 -uRegisterSetting= 0 -uModePin= 0 -uDebugMode= 0 -uExecuteProgram= 0 -uIdCode= FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF -n 0 -uWorkRamAddress= 1000 -uProgReWriteIRom= 0 -uProgReWriteDFlash= 0.

[0.053]  RxTargetDevice::Rx_Init_E1_E20():  E1/E20 m_lpfnFFWCmd_INIT command succeeded

[0.054]  RxTargetDevice::Rx_Init_E1_E20():  E1/E20 m_lpfnFFWCmd_SetUSBTS command succeded

[0.054]  RxTargetDevice::Rx_Init_E1_E20():  E1/E20 time out set to BFW=10 FFW=30

[0.055]  RxTargetDevice::E1_E20_get_device_info():  E1/E20 m_lpfnFFWE20Cmd_GetEINF command succeded

[0.055]  RxTargetDevice::E1_E20_get_device_info():  E1/E20  BfwEMLVer =10300000 BfwLV0Ver 10000000

[0.055]  RxTargetDevice::E1_E20_get_device_info():  E1/E20  EmlTargetLv0Ver =10000000 BoardRev 2

[0.069]  RxTargetDevice::E1_E20_download_monitor_program():  Device LV0 version =10000000, firmware file version =10000000

[0.069]  RxTargetDevice::E1_E20_download_monitor_program():  Emulator version: 10300000

[0.069]  RxTargetDevice::E1_E20_download_monitor_program():  Magic key: aaaaaaaa

[0.069]  RxTargetDevice::E1_E20_download_monitor_program():  Support version: 10000000

[0.069]  RxTargetDevice::E1_E20_download_monitor_program():  Required version: 10300000

[0.069]  RxTargetDevice::E1_E20_download_monitor_program():  Firmware up to date skipping MONP command

[0.883]  RxTargetDevice::E1_E20_download_dcnf_program():  E1/E20 BFW commands suceeded

[0.918]  RxTargetDevice::E20_set_mcu_information():  E1/E20 m_lpfnFFWRXCmd_SetMCU command succeded

[0.918]  RxTargetDevice::E20_set_debug_information():  E1/E20 m_lpfnFFWRXCmd_SetDBG command succeded

[0.920]  RxTargetDevice::E20_set_clk():  E1/E20 m_lpfnFFWE20Cmd_SetJTAGCLK command succeded

[1.353]  RxTargetDevice::E20_set_user_brd_supply():  E1/E20 m_lpfnFFWE20Cmd_EXTPWR command succeded in Enabling Power

[1.788]  mainGDB():  Error in Initializing device

Logging poll message

Hope somebody can help me with this!

Thanks in advance!

Jaap Lemstra

  • I would like to add to my question that i have also tried a jlink pro. Also without luck.

  • Hi Jaap

    Do you have solved you problem with the E1 emulator ?

    I had a similar problem with the E1 emulator and a RX210 device. The problem on my side was, that I had connected an other E10A emulator (for a SH2A device) to my PC. After disconnecting the E10A emulator the E1 emulator was found by the GDB server and debugging is now working.

  • This thread will be archived because it references a deprecated version of the IDE.

    Mike Clements
    RenesasRulz Moderator