e2studio 7.0.0

I saw in one of the responses that Version 7 was available so downloaded it to test.  One thing I noticed right away was the there is way more junk in the console when building.  Is there a configuration somewhere I could not find to turn this off. All those extra line make it hard to spot things in the console while compiling and fill up the buffer.  With no warnings or errors V6.3.0 used 4 lines per file in the console and V7.0.0 is using 28.

Both are using toolchain Renesas CCRX V2.08.00

Excerpt from With V7.0.0

'Building file: D:/Firmware/PosPrinters/HG_MercuryUF_Develop/SingleStationCommon/Application/DIAGS.c'
'Invoking: Compiler'
LowOptimization\DIAGScSubCommand.tmp=
    -cpu=rx600
    -fpu
    -branch=32
    -include="D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\.","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\SingleStationCommon","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\SingleStationCommon\Application","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\RX62Common","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\RX62Common\USB\Device","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Common","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Common\Application","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Barcodes","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Barcodes\DataMatrix\local","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Barcodes\DataMatrix","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Fonts","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Smoothing","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Impact","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\FPGA","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\ThermalEngineFPGA","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Fonts\BiDirectional\local","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Fonts\BiDirectional\lib","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Fonts\BiDirectional\charset","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Fonts\BiDirectional","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Encryption","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Classes","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\FileTypes","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Ethernet","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Ethernet\W5200","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Ethernet\RS9113","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Ethernet\Apps","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799_V7\Application\..\..\..\Compression\LZMA"
    -define=_FEVAL=0,_HAS_C9X_FAST_FMA=0,__RX,HAVE_CONFIG_H=1,HAVE_FRIBIDI_CUSTOM_H=1,DONT_HAVE_FRIBIDI_CONFIG_H=0,APPLICATION_CODE
    -lang=c99
    -nomessage
    -output=obj
    -obj_path="LowOptimization"
    -listfile="LowOptimization/DIAGS.lst"
    -show=source,conditionals,definitions,expansions
    -optimize=max
    -speed
    -nologo
    -nologo
    -change_message=error=5009,5046,5047,5055,5147,5155,5156,5223,5260,5460,5767,5940,6056,6057
    -change_message=error=20940,20009,20046,20047,20055,20147,20155,20156,20223,20260,20460,20767,20940
    -change_message=error=21051,21056,21057,23009,20193,23076,23077,20549
    -change_message=warning=20549
    -nomessage=23033,23034,23035,20177
    -change_message=information=21105
    -nomessage=11174
ccrx -subcommand="LowOptimization\DIAGScSubCommand.tmp" "D:/Firmware/PosPrinters/HG_MercuryUF_Develop/SingleStationCommon/Application/DIAGS.c"
'Finished Building: D:/Firmware/PosPrinters/HG_MercuryUF_Develop/SingleStationCommon/Application/DIAGS.c'


Excerpt from With V6.3.0

'Building file: D:/Firmware/PosPrinters/HG_MercuryUF_Develop/SingleStationCommon/Application/DIAGS.c'
'Invoking: Compiler'
ccrx -cpu=rx600 -fpu -branch=32 -include="D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\.","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\SingleStationCommon","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\SingleStationCommon\Application","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\RX62Common","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\RX62Common\USB\Device","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Common","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Common\Application","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Barcodes","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Barcodes\DataMatrix\local","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Barcodes\DataMatrix","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Fonts","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Smoothing","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Impact","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\FPGA","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\ThermalEngineFPGA","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Fonts\BiDirectional\local","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Fonts\BiDirectional\lib","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Fonts\BiDirectional\charset","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Fonts\BiDirectional","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Encryption","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Classes","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\FileTypes","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Ethernet","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Ethernet\W5200","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Ethernet\RS9113","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Ethernet\Apps","D:\Firmware\PosPrinters\HG_MercuryUF_Develop\_Projects\R799\Application\..\..\..\Compression\LZMA" -define=_FEVAL=0,_HAS_C9X_FAST_FMA=0,__RX,HAVE_CONFIG_H=1,HAVE_FRIBIDI_CUSTOM_H=1,DONT_HAVE_FRIBIDI_CONFIG_H=0,APPLICATION_CODE -lang=c99 -nomessage -output=obj -obj_path="LowOptimization" -listfile="LowOptimization/DIAGS.lst" -show=source,conditionals,definitions,expansions -optimize=max -speed -nologo -nologo -change_message=error=5009,5046,5047,5055,5147,5155,5156,5223,5260,5460,5767,5940,6056,6057 -change_message=error=20940,20009,20046,20047,20055,20147,20155,20156,20223,20260,20460,20767,20940 -change_message=error=21051,21056,21057,23009,20193,23076,23077,20549 -change_message=warning=20549 -nomessage=23033,23034,23035,20177 -change_message=information=21105 -nomessage=11174 "D:/Firmware/PosPrinters/HG_MercuryUF_Develop/SingleStationCommon/Application/DIAGS.c"
'Finished Building: D:/Firmware/PosPrinters/HG_MercuryUF_Develop/SingleStationCommon/Application/DIAGS.c'