Flashloader_pack1.X.0.exe

I right now am following the guide on the flashloader example at

https://synergygallery.renesas.com/media/products/74/193/en-US/r11an0073eu0100-synergy-ssp-flashloader.pdf

I am trying to get this working but require  Flashloader_pack1.2.0b1.exe. I cannot find this download on the website or is there a place where I can download  Flashloader_pack1.3.0.exe since I am using SSP 1.3.0.

I looked in the e2_studio install directory and still cannot find anything. Please let me know where I can find the flashloader pack or where to download it.

I am using the SK-S7G2 starter kit.

 

  • Hi victor,

    For SSP 1.3.0 there is a newer version of the Flashloader Framework - v1.1.0. You will find the framework in the Synergy Gallery: synergygallery.renesas.com/.../utility

    The downloaded archive contains .exe installer in Flashloader_DK-S7G2\Flashloader_Module, which will install the .pack file for the selected e2 Studio instance. There is also the .pack file without an installer.

    Regards,
    adboc
  • In reply to adboc:

    Hi

    I am also looking for Flashloader_pack1.3.0.exe - can anyone tell me where it is currently at

    many thanks,
    alan..
  • In reply to Alan Murphy:

    Got it ok - it was in the framework alan..
  • In reply to Alan Murphy:

    Hi

    My project is made with ssp 1.3.3 and it includes the sf_downloader modules, of the ssp version 1.3.0. I have updated an SSP 1.4 and everything related to ssp 1.3 has disappeared. Is there any update for this new version of ssp?

    thanks
  • In reply to feraro:

    Hi feraro,

    Currently there is no official updated version of the Flashloader framework for SSP 1.4.0. You may try the following ported version, but please keep in mind this is not official version (rename to Renesas.Synergy_flashloader.1.4.0.pack and put to 'packs' directory, most likely C:\Renesas\Synergy\e2studio_v6.2.0_ssp_v1.4.0\internal\projectgen\arm\packs):

    Renesas.Synergy_flashloader.1.4.0.pack.zip

    Regards,
    adboc

  • In reply to adboc:

    HI all,

    I have the same problem, i have a project which uses bootloader Framework with ssp 1.3.3. I migrated to the e2 studio 6.2.0 version and use now ssp 1.4.0. When i opened the project on the new environment, bootloader component has been removed.

    How can I use the Renesas.Synergy_flashloader.1.4.0.pack.zip? What is the procedure to import it?

    thanks
  • In reply to Bj:

    HI Bj,

    You should unzip the file and place the unzipped .pack file in internal/projectgen/arm/packs folder in e2 Studio directory, for example: C:\Renesas\Synergy\e2studio_v6.2.0_ssp_v1.4.0\internal\projectgen\arm\packs

    Regards,
    adboc
  • In reply to adboc:

    Hi adboc,

    I unzipped the Renesas.Synergy_flashloader.1.4.0.pack and put it in internal/projectgen/arm/packs. What should I do to use it in my e2 studio project? I mean to refer to sf_bootloader.h for example

    Thanks
  • In reply to Bj:

    Hi Bj,

    In the configurator, please open Threads tab > New Stack > Renesas > Flashloader - there will be all flashloader frameworks available.

    Regards,
    adboc
  • In reply to adboc:

    When I unzip the folder Renesas.Synergy_flashloader.1.4.0.pack.zip and put it in the internal\projectgen\arm\packs, it appears as a folder and nothing happens in e2 Studio.

    Otherwise, if I just rename Renesas.Synergy_flashloader.1.4.0.pack.zip to Renesas.Synergy_flashloader.1.4.0.pack and put it in internal\projectgen\arm\packs, it seems to be regonized as a pack file since I have a message in e2 sutdio which makes me notice that "Changes to the CMSIS Pack Folder have been detected"

    However i can't see the module in Threads tab > New Stack > Renesas > Flashloader. Is there sonmething I missed?

    Thanks
  • In reply to Bj:

    I made that I described above and I restarted e2 studio, I can see now Flashloader in Threads tab > New Stack > Renesas .
    However there are only three possibilities and not the one I used in Renesas.Synergy_flashloader.1.3.0.pack . Bootloader Framework on sf_bootloader_mcu is missing in Renesas.Synergy_flashloader.1.4.0.pack
    Does anyone have a suggestion?
  • In reply to Bj:

    Hi Bj,

    Sorry, you're right, it's needed to rename *.pack.zip to *.pack and place it in packs/.

    I've just created a new project and see the Bootloader Framework on sf_bootloader_mcu available. Have you selected SSP 1.4.0 in BSP tab?

    Regards,
    adboc

  • In reply to adboc:

    Hi adboc,

    Thanks for your help, I also tried with a new project and I could see all modules. However, I couldn't see them in my existing project so I deleted it from my workspace and imported it again.

    When I opened my project and built with SSP 1.4.0, it didn't remove bootloader component (certainly because the pack is recognized) and the build is ok.

    However I still can't see all modules in Flashloader but my project works, it's not a problem for now but I can't add some modules if needed.

    Thanks,

    Bj
  • In reply to Bj:

    Hi Bj,

    Could you check if there are no components from SSP older than 1.4.0 in Components tab? I suggest removing .module_descriptions directory, it will be generated again when opening the project.

    Regards,
    adboc
  • In reply to adboc:

    Hi Adboc,

    I checked and all components come from SSP 1.4.0. I did what you suggested by removing .module_descriptions directory, when I opened the project it generated again the directory but I couldn't see the flashloader module in Threads tab > New Stack

    Regards,
    Bj