I am working with SSP 120b on a custom board with a S7G2 (same reference on the SK-S7G2) with a different PHY.
I try to make the Nx_Duo_Http_Server Demo working. It runs well on the SK-S7G2 but on my custom board I see netwotks LED working but I have no ping answer (first packet return host unreachable and three next packet are timed out.
My PHY is a Texas Instrument DP83848 used in RMII mode on synergy ethernet channel 1. The main difference I spotted is the PHY adress we had to set it to 0x03 and the starter kit is set to 0x00. I wonder if this could be the issue. I read chapter 29 of the S7G2 datasheet and NetX user guide but I can't find how to set this PHYAD (register or function ...)
any idea to solve this issue or to set PHYAD ?
In reply to TLHQ:
In reply to Renesas Karol:
I've tried and I can't compile with NetX Sources "ERROR NX_IP_HEADER undeclared (first use in this function) | nx_arp_dynamic_entry_set.c line 325" with and without threadX sources.
I've tried to upgrade to the new xware protocol but is there a way to launch a http server without needing a fileX usbx key storage plugged with this new version ? because I can't have one on my custom board and I just need to display basic html page with few gif logo as in the demo.