I am using..
while working with RTC, clock source...
1. LOCO, RTC behaves normally while debugging but when the device is turned off the RTC time does not increase.
1. SubClock, RTC behaves shows a default time (1970-01-01) while debugging but,
when the debugger is turned off the RTC time is correct.
Can anyone explain this.
During debug we are using LOCO and in release we use Sub-Clock, it works.
Only the subclock can operate when powered from VBATT :-
Di you check the sub clock was running when trying to run the RTC from the sub-clock?
Thanx for sharing your fix. Will help others with a similar issue.
Can you please share me your rtc file for reference.
Can you be a little more specific as to what you are looking for?
i am using s7g2 custom board 100 pin controller, RTC working fine during power on time,but after power off to on condition rtc updating only initilaized value which i have hardcoded, not updating current value.i have attached the files for your reference which i have working on it. rtc_test__working.zip
Look over this Knowledge Base post and let us know if it helps you with all the settings needed for the RTC to work over power off/on..
If you still have issues, consider creating a new post. This one is a bit off your topic and might get overlooked.