modify data placement from RAM to SDRAM using the script icf file

Hello I am using e2 studio Version: 5.3.1.002 AND ssp1.2.2 with a custom board and a Synergy S5D9. And IAR compiler and lkinker . I get this error when I build the Project: Error[Lp011]: section placement failed unable to allocate space for sections/blocks with a total estimated minimum size of 0xa0f50 bytes (max align 0x8) in <[0x1ffe0000-0x2007ffff]> (total uncommitted space 0x9fe40).

I have shown in the *.map file, that the GUIX_XXXXX_especifications.o is placed in the SRAM región and it has grown a lot. I would like to place it in SDRAM región.

I m trying to do that, typing the S5D9.icf file. 

...

place at start of VECT_region  { ro section .vectors };
place in VECT_region           { ro section .vector.* };
place in ROMREG_region         { ro section .rom_registers };
place at start of FLASH_region { block VECT_INFO };
place in FLASH_region   { block LOCK_LOOKUP,
                          ro,
                          ro section .rodata,
                          block QSPI_NON_RETENTIVE_INIT_BLOCK,
                          block RAM_INIT_CODE,
                          block USB_DEV_DESC_BLK };
/* If DTC is used, put the DTC vector table at the start of SRAM.
This avoids memory holes due to 1K alignment required by it. */
place at start of RAM_region   { rw section .ssp_dtc_vector_table };                       
place in RAM_region     { rw,
                          rw section .noinit,
                          rw section .bss,
                          rw section .data,
                          block HW_LOCK,
                          rw section HEAP,
                          rw section .stack,
                          block RAM_CODE }
                 except { rw section .bss object GUIX_XXXXX_specifications.o };
place in DF_region      { ro section .data_flash };
place in SDRAM_region   { rw section .sdram, rw section .frame ,
                          rw section .bss object GUIX_XXXXX_specifications.o };
place in QSPI_region    { section .qspi_flash };
place in QSPI_region    { block QSPI_NON_RETENTIVE_BLOCK};
place in QSPI_region    { ro section .rodata object GUIX_XXXXX_resources.o };
place in RAM_region     { last section FREE_MEM};

...

But it doesn´t work. The map file doesn´t change.

Can you help me,please?

Parents Reply Children
No Data