MIPI Aistarvision Mezzannine Adapter board v2.4 and RZG2 interface with OV5645

Hi Team,

I am trying to Connect Ov5645 MIPI CSI2 camera using Mezannine adapter v2.4  with RZG2M  Hihope v4.0 board.

After power on i dont see any video or media instances being generated for MIPI camera.

Can i please get the hardware and software configuration for succesfully interfacing the CSI2 camera with RZG2M. Also this is to inform that am working on yocto bsp.

thanks and regards.

Parents Reply
  • Hi Sai,

    Sorry, I think last reply didn't get updated properly.
    I have already read the document but provided, but could not find any procedure to interface mipi camera.
    Also I have tried updating the Device tree file.

    I2C2 adapter detects the camera on 0x3c address but I could not stream through the command:

    gst-launch-1.0 -e v4l2src device=/dev/video13 ! video/x-raw,format=YUY2 ,width=640,height=480,format=UYVY ! waylandsink position-x=50 position-y=50 &

    And even I can see that i2c5 adapter(second camera connected to i2c5) doesnt detect the camera slave on the bus. When checked through

    i2cdetect -y -r 5

    Please provide the solution for connecting MIPI camera with Aistarvision Mezannine MIPI adapter.

    Thanks and Regards