I try to load the sample from SolKit.V1.4.3\Software\BaremetalDrivers to QSPI FLASH.
I built a RAW binary for A7 core and try to upload it to QSPI by U-boot, according the document.
USB DFU A7 set env command:
=> setenv bootcmd "dcache off&&sf probe&&sf read 0x80008000 1d0000 600000&&go 0x80008000"
Is it correct for bare-metal image as well?
The M3 configuration is uploading and working, but not the A7.
Please close the ticket, sorry for the delayed response.
I hope you've figured this out already. But if not yet, please wait a little bit longer until some experts respond. However, if you can't still receive an answer from this forum, you can submit a ticket to Renesas Technical Support to get help for this issue. Thank you!
JBRenesasRulz Forum Moderator