I built the Starter Kit (h3ulcb) BSP according to the contents of the URL below：elinux.org/.../v5.1.0
However, according to R-Car / Boards / H3SK, it seems that u-boot-elf-h3ulcb-4x2g.srec is required for DDR 8GiB board, but it is not created under deploy. elinux.org/.../H3SK
Is there a solution?
$ pwd/mnt/work/build/tmp/deploy/images/h3ulcb$ ls -1 u-boot*u-boot-elf-h3ulcb-v2020.10+gitAUTOINCemail@example.com@u-boot-h3ulcb.bin-r8a7795_h3ulcb@u-boot-initial-env-h3ulcb-r8a7795_h3ulcb@u-boot-initial-env-h3ulcb-r8a7795_h3ulcb-v2020.10+gitAUTOINC+050acee119-r0u-boot-initial-env-r8a7795_h3ulcb@u-boot-r8a7795_h3ulcb-v2020.10+gitAUTOINCfirstname.lastname@example.org_h3ulcb@
Thanks & Regards,
Since Yocto v5.1.0, All kinds of h3ulcb use same U-boot binary.So, u-boot-elf-h3ulcb-4x2g.srec isn't generated.Please use u-boot-elf-h3ulcb.srec instead of it.
And elinux.org/.../H3SK is updated…
And elinux.org/.../H3SK is updated.See also elinux.org/.../H3SK
I understand.Thank you.