u-boot-elf-h3ulcb-4x2g.srec is not created.

Hi,

I built the Starter Kit (h3ulcb) BSP according to the contents of the URL below:
elinux.org/.../v5.1.0

However, according to R-Car / Boards / H3SK, it seems that u-boot-elf-h3ulcb-4x2g.srec is required for DDR 8GiB board, but it is not created under deploy.
elinux.org/.../H3SK

Is there a solution?

$ pwd
/mnt/work/build/tmp/deploy/images/h3ulcb
$ ls -1 u-boot*
u-boot-elf-h3ulcb-v2020.10+gitAUTOINC+050acee119-r0.srec
u-boot-elf-h3ulcb.srec@
u-boot-h3ulcb.bin@
u-boot-h3ulcb.bin-r8a7795_h3ulcb@
u-boot-initial-env-h3ulcb-r8a7795_h3ulcb@
u-boot-initial-env-h3ulcb-r8a7795_h3ulcb-v2020.10+gitAUTOINC+050acee119-r0
u-boot-initial-env-r8a7795_h3ulcb@
u-boot-r8a7795_h3ulcb-v2020.10+gitAUTOINC+050acee119-r0.bin
u-boot.bin@
u-boot.bin-r8a7795_h3ulcb@

Thanks & Regards,