We have H3 SK (RTP0RC77951SKBX010SA03, 8GiB(Samsung 2GB x4), Single Rank) and KF (SBEV-RCAR-KF-M06Board).
And we have LI-IMX219-MIPI-FF-NANO-H136 camera sensor module and trying to interface with RCar -H3 SK + KF platform.
We followed R-Car/Boards/Yocto-Gen3/v5.1.0 - eLinux.org to build the Linux and able to boot the system.
Is it possible to connect LI-IMX219-MIPI-FF-NANO-H136 module to CN48 of the KF board?
If possible is there any configuration needs to be taken care in DTB / kernel?
Please give your input.
Please try the following steps again.
=> tftp 0x48080000 Image; tftp 0x48000000 r8a77951-ulcb-kf.dtb=> tftp 0x48040000 ulcb-kf-imx219.dtbo=> fdt addr 0x48000000=> fdt resize 8192=>…
I don't have that camera.
Let me ask you some questions.
1. Are you using ulcb-kf-imx219.dtbo?
2. Do you see "imx219" as below?
$ media-ctl -d / dev / media0 -p | grep imx219
<-"imx219 21-0010": 0 [ENABLED, IMMUTABLE]
--entity 13: imx219 21-0010 (1 pad, 1 link)
Thanks for your feedback.
Please refer below comments on your feedback and share your further inputs,
Yes. Below is the boot command we use,
bootcmd='tftp 0x48080000 Image; tftp 0x48000000 r8a77951-ulcb-kf.dtb;tftp 0x48040000 ulcb-kf-imx219.dtbo;booti 0x48080000 - 0x48000000
fdt=addr 0x48000000; fdt resize 8192; fdt apply 0x48040000
No, I don't get any O/P on this command.
root@h3ulcb:~#media-ctl -d /dev/media0 -p | grep imx219
But, the option is enabled in the config. Please refer below.
root@h3ulcb:~# zcat /proc/config.gz | grep CONFIG_VIDEO_IMX219 CONFIG_VIDEO_IMX219=y
=> tftp 0x48080000 Image; tftp 0x48000000 r8a77951-ulcb-kf.dtb=> tftp 0x48040000 ulcb-kf-imx219.dtbo=> fdt addr 0x48000000=> fdt resize 8192=> fdt apply 0x48040000=> booti 0x48080000 - 0x48000000
Do you have any updates?
This question has been opened but there is no reply for a long time.We have a tentative answer already, so I will close this question.If you have any updates or want to ask another question, please post new question.