Problem with creating new project. Pack Missing errors. SSP 1.1.3

I am walking through "add cloud driven gpio to smart chef tutorial"  (http://renesas-blog.mediumone.com/add-cloud-driven-gpio-to-smart-chef/).   I downloaded smart chef source code (D6000809 2/14/17).   I installed e2 studio 5.2.0.020.    I used the smartchef to create new project called GPIO.

After tutorial step 1 (project import and creation), I received 2 errors and 36 warnings.

Description Resource Path Location Type
Program "arm-none-eabi-g++" not found in PATH GPIO Project Properties, C++ Preprocessor Include.../Providers, [CDT GCC Built-in Compiler Settings Cross ARM] options C/C++ Scanner Discovery Problem
Program "arm-none-eabi-gcc" not found in PATH GPIO Project Properties, C++ Preprocessor Include.../Providers, [CDT GCC Built-in Compiler Settings Cross ARM] options C/C++ Scanner Discovery Problem
Invalid project path: Include path not found (GPIO\src\synergy_gen). GPIO pathentry Path Entry Problem
Invalid project path: Include path not found (GPIO\synergy_cfg\ssp_cfg\bsp). GPIO pathentry Path Entry Problem
Invalid project path: Include path not found (GPIO\synergy_cfg\ssp_cfg\driver). GPIO pathentry Path Entry Problem

After tutorial stetp 2 (opening CONFIGURATION.XML), I received 2 window boxes.

1. Warnning:Pack missing for project's current selected SSP version of 1.1.3.  Project: GPIO   If you remain with this SSP version you will not be able to add further SSP components or re-extract SSP source files.

2. Editor could not be initialized. Check installation of pin mapping files.

On the components tab, all the components have a warning yellow symbol (PACK missing either user.s3_iot_led.dev.1.1.3.pack or Renesas.synergy.1.1.0/1.1.1 packs)

I created the project three times.  I got the same result.   Thank you for any help.  

Michael

PS: I am new developer.   Maybe I did not install e2 correctly.   Please advice.  Thanks.GPIO_Tutorial_summary.pptx 

 

 

 

  • In reply to Mike:

    Hi Michael,

    You can also skip the 'm1' and 'WiFi\lib' folders as well. It should reduce the size to less than couple of hundred KBs.
  • In reply to Faheem:

    smartchef2_project.zip

    Good morning. Thank you for your suggestions. Here is the new zip file.

    Thank,
    Michael

  • In reply to Faheem:

    Hi Faheem,

    Were your team able to find what caused the problem? Look forward to hear any updates from you. Hope to use the studio soon. I am eager to use it.

    Thank you,
    Michael
  • In reply to Mike:

    Hi Michael,

    Unfortunately, I did not hear anything back from the team, yet. I'm not really sure about the resolution priority, but you should be hearing back from Neelima here, if there's any further progress on this issue.
  • In reply to Faheem:

    Hi Faheem,

    Thank you so much for your response. I see. Hope to hear the breakthrough!

    In the meantime, I will continue to understand the smart chef example. I am making progress in understanding and changing the BBQ recipe. It is very interesting how it is done.

    I will post questions regarding mqtt next week. I like to understand how the python code in the cloud read from/write to the peripherals of the IOT board. I need to know the address/control/data packet format. So, I can later perform the read/write operations on other registers in I2C sensor chips. I could not deduct the format from analyzing the code in the examples. I need help.

    Best regards,
    Michael
  • In reply to Faheem:

    Hi Mike,

      Some files were missing in your project. Hence, I couldn't build it and don't know the issue. Can you send  me your email address?I can send the working project to you.

    Neelima

     

  • In reply to Neelima:

    Hi Neelima,

    I see. I can give you my email. It is mikelisfbay@yahoo.com. Thank you for spending time to investigate the problem for me.

    Once I get your file from you, I will try to compare your project with what I download from Renesas. Maybe I can help Renesas to trace what happened. So, other developers will not run into the same problem in the future.

    Thank you,
    Michael
  • In reply to Neelima:

    Hi Neelima,

    I have not seen your email with attachment files yet. I checked both inbox and spasm folders. Were you able to send the project files to my Yahoo email account? Let me know if you have any problems with sending your email to me.

    Thank you again,
    Michael
  • In reply to Mike:

    Hi Mike,

    I resend the project through ftp site. Please check if you have received it.

    Neelima
  • In reply to Neelima:

    Hi Faheem and Neelima,

    Thank you so much for your help in installing E2 Studio and SSP pack. Thank you for the updated evaluation license file that allows me to build my project successfully for the first time yesterday.

    Best regards,
    Michael
  • In reply to Mike:

    The above actions fix my problem.

  • In reply to Mike:

    Hi Faheem and Neelima,

    I created a blog to show the installation process by screen shots. I hope that it will be a valuable help to other developers.

    Here is the link
    www.miketechuniverse.com/.../How-to-install-Renesas-e2-Studio-for-S3A7-Board

    Best Regards,
    Michael