I am new to Renesas products. I have got a Compact Emulator M3062PT3-CPE with M3062PT-EPBM MCU board as my hardware setup. I am running HEW 4.09.00.007 using Renesas M16C Toolchain V6.0 and M16C R8C Compact Emulator Debuuger V1.03 Release 00.
I am able to CONNECT to the emulator and start running my project. However, on hitting a HALT button, it starts showing "Can't send data (16013)" error. The "self check" option when clicked on the emulator init dialog, it shows "target is used already (16015)".
The self check test when run from the emulator (After pressing the reset button twice as described in the manual), shows Power LEDs and Reset and SAFE LEDs ON. This condition is described in the manual as "Emulator may be damaged". But if the emulator is damaged, HEW is still connecting to the emulator, so I rule out this possibility.
Can anyone please give some clue how to debug this problem?
Thanks in advance to all.
You should see the assembler code in mixed view. But if you don't even see addresses in the address column there is something wrong. Usually you have a file opened that does not belong to the actual project. I usually do the following:
- Close all source windows.
- Download the application code again.
- Push RESET button.
After pushing the RESET button HEW should open the source window for the start-up code. There should also be addresses and switching to mixed view should work.