Serial pins - Baud rate


What are the supportable baud rates of all serial pins available in the GR- Peach board?

I want to interface Sparkfun's Bluesmirf silver Bluetooth module. I tried interfacing via serial pin 4 at a baud rate set to 115200 but it doesn't seem to communicate. Please guide me in fixing this issue. 

FYI :  I did the same process using HC-05 module with a baud rate set to 38400. It works fine.

  • Sorry to delay replay.

    You can set baud rate from 1200 to 2,083,333 bps as below reference.

    Just in case, I tried 115,200 and 921,600 baud rate with FTDI USB serial adapter, then it worked.

    void setup() {

     // put your setup code here, to run once:




    void loop() {

     // put your main code here, to run repeatedly: