Let me inform you about a development environment for GR-PEACH.
As you may know, we had prepare Web compiler for GR-PEACH, that enables to program like Arduino Sketch.
Now we have done to release V1.05 template on Web compiler, that enables USB host, Web server and Camera. And the speed of executing build got improved.
In addition, I put the project for e2studio as following link.
This project enables to develop on e2studio that is based on ECLIPSE.
I am facing below issues while setting up E2studio. Can you please share any guide to setup e2studio for GR peach?
Description Resource Path Location Type
Program "arm-none-eabi-gcc" not found in PATH gr
Project Properties, C++ Preprocessor Include.../Providers, [Renesas GNUARM-NONE Library GCCBuildinCompilerSettings] options C/C++ Scanner Discovery Problem
In reply to lavaraja:
Could you confirm the toolchain window from [Help] ->[Add Renesas Toolchains] as below.
You need to install any version of GCC ARM Embedded compiler
In reply to Okamiya Yuuki:
I have attached the screenshot. Please let me know if I need to install any other tools chains.
Could you please share any step by step guide to import peach_sketch.zip into E2studio ?. I have tried to import it into project folder but I see a lot of error messages .
Ok, but let me solve this query at first.
Could you try change settings of version in Toolchain tab as below.
The below is set to 5.3.1xx, but you need to set your version installed.
I don't see those options in my Ide. Am i missing some settings here?
How is your environment setting ?
The below is mine.
Thanks . Below is my environment settings.
after setting PATH variable in system above error got resolved. Receiving below error when try to build the project.
I'm sorry, but I'm not sure about the problem.
I attached the archive, that is exported with same version of GNU ARM 4.9.3.
Could you try to import that after remove current project?
Thanks . The make error got resolved .Now am I able to build the project. Could you please share the steps to generate .bin file from the project ?.It would be a great help if you can share a video/pdf with the steps.
It sounds good.
After built in success, you'll find .bin in Debug folder.
Thanks a lot for your help. I am able to find the .bin file and upload it to GR peach.
Hi Yuuki ,
Can you please share any libraries(sample code) used for playing mp3/wav files place in SD card of GR peach ?. I have tried the below arduino library but it didn't work.
Hi, now we don't have the library such as GR-SAKURA and others.
Let me have a time to consider.
The Arduino one you mentioned uses native AVR code, that is difficult to port for GR-PEACH.
I see the below MP3 player project done using GR-SAKURA . Can this be done with out using any libraries ?