Memory usage for RX processor with GCC

When I opened the Memory Usage tab, I get this message:

GCC library projects (RL, RX, RZ, RE) and Synergy library projects don't have library list file.

The map file is generated by the linker. I've opened this project in e2studio 2020, but when I open this project in e2studio 7, I get the same message.
Building with toolchain 8.3.0.201904 or 4.8.4.201703 has the same result.
I've also an old project with also an RX231 processor, but that works fine.

How can I make this option working?

Thanks,

Jacob

Parents
  • I learned about three new GCC compiler/linker flags this week that are  MEMORY { FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xff000 RAM Using the --print-memory-usage linker flag, Target Pay and Benefits we can see the actual  You might also have multiple RAM regions: a processor's internal SRAM and external DRAM.Enables ( -fpu ) or disables ( -nofpu ) the use of RX floating-point hardware.  the generic ' RX600 ' and ' RX200 ' series hardware and the specific ' RX610 ' CPU.  which is a benefit to embedded applications with tight memory constraints.

Reply
  • I learned about three new GCC compiler/linker flags this week that are  MEMORY { FLASH (rx) : ORIGIN = 0x1000, LENGTH = 0xff000 RAM Using the --print-memory-usage linker flag, Target Pay and Benefits we can see the actual  You might also have multiple RAM regions: a processor's internal SRAM and external DRAM.Enables ( -fpu ) or disables ( -nofpu ) the use of RX floating-point hardware.  the generic ' RX600 ' and ' RX200 ' series hardware and the specific ' RX610 ' CPU.  which is a benefit to embedded applications with tight memory constraints.

Children
No Data