Hi,

beim Code Download des x30 Files bekomme ich unter HEW immer die Fehlermeldung "Not enough memory"???

Der Output ist mal angehängt. Bei dem Chip handelt es sich um den R5F64189 ( also den R32C 118 mit 1M ROM und 63K Ram - wenn ich mich nicht vertan habe ).

Ich verwenden den E8a Debugger zum download. Dabei hab ich den
oben genannten Typen ausgewählt und beim ROM FFF0_0000 und RAM FE00 eingestellt.

Vielleicht hat jemand von euch eine Idee was genau das Problem sein könnten?

Danke,
Andi

PS: Hier der Output nach dem Build:

Building All - r32c_118_can2 - Debug_R32C_E8a_SYSTEM

Phase R32C/100 C Compiler starting
G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\can01.c
R32C/100 Series C Compiler V.1.01 Release 00
Copyright(C) 2006,2007. Renesas Technology Corp.
and Renesas Solutions Corp., All Rights Reserved.
G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\hwsetup.c
R32C/100 Series C Compiler V.1.01 Release 00
Copyright(C) 2006,2007. Renesas Technology Corp.
and Renesas Solutions Corp., All Rights Reserved.
G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\r32c_118_can2.c
R32C/100 Series C Compiler V.1.01 Release 00
Copyright(C) 2006,2007. Renesas Technology Corp.
and Renesas Solutions Corp., All Rights Reserved.
Phase R32C/100 C Compiler finished

Phase R32C/100 Assembler starting
G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\ncrt0.a30
R32C/100 Series Assembler system V.1.01.00
Copyright(C) 2006(2007). Renesas Technology Corp.
and Renesas Solutions Corp., All Rights Reserved.
macro processing now
assembler processing now
--
TOTAL ERROR(S)    00000
TOTAL WARNING(S)  00000
TOTAL LINE(S)     00237   LINES
DATA     00000000(000000H)  data_SB8
DATA     00000000(000000H)  bss_SB8
DATA     00000000(000000H)  data_NEAR
DATA     00000000(000000H)  bss_NEAR
DATA     00000000(000000H)  data_MON1
DATA     00000000(000000H)  bss_MON1
DATA     00000000(000000H)  data_MON2
DATA     00000000(000000H)  bss_MON2
DATA     00000000(000000H)  data_MON3
DATA     00000000(000000H)  bss_MON3
DATA     00000000(000000H)  data_MON4
DATA     00000000(000000H)  bss_MON4
DATA     00001536(000600H)  stack
DATA     00000768(000300H)  heap
DATA     00000000(000000H)  data_FAR
DATA     00000000(000000H)  bss_FAR
DATA     00000000(000000H)  data_EXT
DATA     00000000(000000H)  bss_EXT
ROMDATA  00000000(000000H)  data_EXT_INIT
ROMDATA  00000000(000000H)  rom_EXT
CODE     00000000(000000H)  program_EXT
ROMDATA  00000000(000000H)  rom_FAR
ROMDATA  00000000(000000H)  data_NEAR_INIT
ROMDATA  00000000(000000H)  data_MON1_INIT
ROMDATA  00000000(000000H)  data_MON2_INIT
ROMDATA  00000000(000000H)  data_MON3_INIT
ROMDATA  00000000(000000H)  data_MON4_INIT
ROMDATA  00000000(000000H)  data_SB8_INIT
ROMDATA  00000000(000000H)  data_FAR_INIT
ROMDATA  00000000(000000H)  switch_table
CODE     00000000(000000H)  program
CODE     00000000(000000H)  interrupt
ROMDATA  00000000(000000H)  vector
ROMDATA  00000036(000024H)  fvector
CODE     00000343(000157H)  interrupt
( G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\ncrt0.a30 )
----*-
Phase R32C/100 Assembler finished

Phase R32C/100 Linker starting
Linkage Editor (ln100) for R32C/100 Series V.1.00.02.000
Copyright(C) 2006. Renesas Technology Corp.
and Renesas Solutions Corp., All Rights Reserved.
now processing pass 1
processing "G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\ncrt0.r30"
processing "G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\can01.r30"
processing "G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\hwsetup.r30"
processing "G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\r32c_118_can2.r30"
processing "Libraries"
now processing pass 2
processing "G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\ncrt0.r30"
processing "G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\can01.r30"
processing "G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\hwsetup.r30"
processing "G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\r32c_118_can2.r30"
processing "c:\program files\renesas\hew\tools\renesas\nc100\v101r00\lib100\nc100lib.lib ( mdata.r30 )"
License expires in 60 days
DATA     00002336(0000920H) Byte(s)
ROMDATA  00000156(000009CH) Byte(s)
CODE     00003600(0000E10H) Byte(s)
G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\r32c_118_can2.map is modified
G:\DATA_work\DATA_R32c\r32c_118_can2\r32c_118_can2\r32c_118_can2\Debug_R32C_E8a_SYSTEM\r32c_118_can2.sni is created
Phase R32C/100 Linker finished

Phase R32C/100 Load Module Converter starting
Load Module Converter (lmc100) for R32C/100 Series V.1.00.01.000
Copyright(C) 2005(2007). Renesas Technology Corp.
and Renesas Solutions Corp., All Rights Reserved.
-
Phase R32C/100 Load Module Converter finished

Build Finished
0 Errors, 0 Warnings